Oregon Scientific WMR112 Mode D'emploi page 6

To display the dew point maximum and minimum temperatures,
1. Press the indoor temperature window or repeately until "DEW"
icon appear.
2. Press [MEMORY] repeatedly for the desired record. The time
and date of the record will also be displayed alternatively with
"STAMP" icon in the clock window.
The display will automatically return to the current temperature or
dew temperature whatever is displayed before if no key is pressed
for about one minute.
To clear the dew point memory,
1. Press the indoor temperature window or repeately until "DEW"
icon appear.
2. Press and hold [MEMORY] till a key tone is heard.
3. Press [MEMORY] to check if the memory is clear.
INDOOR HUMIDITY
The current indoor relative humidity, taken by the indoor baro-
thermo-hygrometer, is displayed on the indoor hygrometer window.
To display the maximum, minimum and current humidity,
1. Press the indoor humidity window.
2. Press [MEMORY] repeatedly for the desired record. The time
and date of the record will also be displayed alternatively with
"STAMP" icon in the clock window.
To clear the memory,
1. Press the indoor humidity window.
2. Press and hold [MEMORY] till another key tone is heard.
3. Press [MEMORY] to check the memory is clear.
OUTDOOR AND CHANNEL TEMPERATURES
The temperature readings taken by the outdoor thermo-hygrometer
and separate thermo or thermo-hygro sensors are displayed on the
outdoor and channel temperature window.
As this window can display up to four different sets of data, specify
the instrument or channel you want to read.
To do so,
1. Press the outdoor/channel temperature window.
2. Press [CHANNEL] to go from the outdoor reading taken by the
outdoor thermo-hygrometer to those taken by individual sensors
(Channel 1, 2 or 3).
The outdoor thermo-hygrometer is also capable of detecting the dew
point temperature as well as the wind chill reading. To display such
information, press the outdoor/channel temperature window
repeatedly.
The temperatures can be displayed in degree Centigrade (°C) or
Fahrenheit (°F).
To select the display unit,
1. Press the outdoor/channel temperature window.
2. Press [UNIT] repeatedly for the desired setting. The selected unit
will apply to all temperature displays in this window.
Note: The unit of all temperature related display will be changed
simultaneously.
All manuals and user guides at all-guides.com
To display the maximum and minimum temperatures,
1. Press the outdoor/channel temperature window.
2. Press [CHANNEL] for the outdoor thermo-hygrometer or the
3. Press [MEMORY] repeatedly for the desired record. The time
To display the dew point temperature for a channel, press the
window again when the channel temperature is located.
To clear the memory,
1. Press the outdoor/channel temperature window.
2. Press [CHANNEL] for the outdoor thermo-hygrometer or the
3. Press and hold [MEMORY] till a key tone is heard.
4. Press [MEMORY] to check if the memory is clear.
To display the dew point maximum and minimum temperatures,
1. Press the outdoor/channel temperature window or repeately until
2. Press [CHANNEL] for the outdoor thermo-hygrometer or the
3. Press [MEMORY] repeatedly for the desired record. The time
To display the dew point temperature for a channel, press the
window again when the channel temperature is located.
To clear the dew point memory,
1. Press the outdoor/channel temperature window or repeately until
2. Press [CHANNEL] for the outdoor thermo-hygrometer or the
3. Press and hold [MEMORY] till a key tone is heard.
4. Press [MEMORY] to check if the memory is clear.
The relative humidity readings taken by the outdoor thermo-
hygrometer and separate thermo-hygro sensors are displayed on the
outdoor/channel humidity window.
As this window can display up to four different sets of data, specify
the instrument or channel you want to read.
To do so,
1. Press the outdoor/channel humidity window.
2. Press [CHANNEL] to go from the outdoor reading taken by the
To display the maximum, minimum and current humidity,
1. Press the outdoor/channel humidity window.
2. Press [CHANNEL] for the outdoor thermo-hygrometer or the
3. Press [MEMORY] repeatedly for the desired record. The time
6
desired channel.
and date of the record will also be displayed alternatively with
"STAMP" icon in the clock window.
desired channel.
"DEW" icon appear.
desired channel.
and date of the record will also be displayed alternatively with
"STAMP" icon in the clock window.
"DEW" icon appear.
desired channel.
OUTDOOR AND CHANNEL HUMIDITY
thermo-hygrometer to those taken by individual sensors (Channel
1, 2 or 3).
desired channel.
and date of the record will also be displayed alternatively with
"STAMP" icon in the clock window.