Salora HDD-2510 Mode D'emploi page 169

System Setup
Restoring the Default Settings
1.
Use the Arrow buttons Up/Down to select "Restore Default Settings" in the general Setup Menu and press
Enter. The unit will ask you to confirm that all settings will be erased and reset to default settings. Use OK to
proceed or Cancel to keep the present settings.
2.
Use the Arrow buttons Up/Down to select OK.
3.
Press Enter to restore the default settings. If you experience malfunctions, it is likely due to erroneous
settings. Try to use this function to solve the problem.
Screen Saver
The Screen Saver can display interesting pictures automatically on your television screen while the unit is idle.
1.
Use the Arrow buttons Up/Down to move the cursor to "Screen Saver" in the general Setup Menu.
2.
Press Enter and a submenu for the screen saver settings appears.
3.
Use the Arrow buttons Up/Down to select either On or Off.
4.
Press the Enter button to activate or deactivate the screen saver function. Once the screen saver is activated,
you can press any key to leave the menu.
5.
Press the Enter button to go to the next menu item and change other settings.
All manuals and user guides at all-guides.com
54