Salora HDD-2510 Mode D'emploi page 164

System Setup
Setup Menu - Audio
1.
Enter the System Setup Menu.
2.
Use the Arrow buttons Up/Down
Press the Enter button to enter the Playback Settings
Menu. The following picture shows the Playback
Settings main menu.
Analogue Audio Output
The unit can set the analogue audio output to 2-CH or 5.1-CH
The 2 channel output goes to the L and R channels.
1. Enter the playback settings menu, use the Arrow buttons Up/Down to select
Enter button.
2. Use the Arrow buttons Up/Down to select
SPDIF Output
This unit has a digital audio output. You can enjoy sound of better quality through a digital audio output.
1.
Enter the play settings menu, use the Arrow buttons Up/Down to select
button to pop up a new menu.
2.
Use the Arrow buttons to select the desired value (RAW, LPCM) and press the
3.
Press RETURN, to go to the previous menu.
All manuals and user guides at all-guides.com
to select "Audio".
2-CH or 5.1-CH
Analog Audio
SPDIF-Output
LPCM-Output
Dynamic
(5.1 Surround Sound).
SPDIF Output, and press the
Output, and press the Enter button
SPDIF Output, and press the Enter
Enter
49
ON
RAW
LPCM 96K
Off
button to confirm.