Salora HDD-2510 Mode D'emploi page 151

Playback Mode
Track Selection
Available for CD, etc.
1. Enter the playback control menu and highlight "Track".
2. Press Enter to activate the input mode.
3. Press the number of the desired track.
4. Press Enter to start playback.
If the Enter button is not pressed within a few seconds, the DVD recorder will automatically start playback of the
selected track.
Track Selection Playback for Audio or MPEG4 Discs
With audio or video discs like MP3 or MPEG4 discs, you
can select a track from the disc content and play it.
1. Press the Arrow buttons Left/Right to move the
cursor to the disc content box as shown in the illustration
to the right.
2. Press the Arrow buttons Up/Down to select a track.
Then press Enter to start playback of the selected track.
Time Selection
Enter the playback control menu and select "Track Time".
The time shown below the icon is the elapsed time of the current chapter (for DVD discs) or the current track (non-
DVD discs).
The time selection function is not available for some
discs, and cannot be selected. Press Enter to enter the
edit mode. Use the Number buttons to enter the time
index and press the Enter button to confirm. If the time
index is valid (i.e. within the total length of the current
chapter or track), the system will start playback from that
point of time.
♦
You can only select a time point in the current
chapter or title for playback.
♦
If the input time exceeds the total length of the
current title, the system will remain in its current
mode.
All manuals and user guides at all-guides.com
Mode Normal
Trick
Track
Audio Stereo
Off
Time
TRACK
Time
36