GUARDO Action Cam One Mode D'emploi page 15

All manuals and user guides at all-guides.com
MOUNTS WITH ADHESIVE TAPE
How to apply the adhesive tape (IMPORTANT!)?
• Apply the tape 24 hours before use in a room temperature around 21°C
• Make sure the surface you want to apply the tape on is smooth: the tape will not
adhere properly on an embossed or poreus surface.
• Clean and dry the surface before application. Any cleaner that will not leave a film
or oily surface can be used!
• Press the tape entirely and firmly into place!
How to remove the adhesive tape?
The adhesive tape can be removed by using a hairdryer:
the heated air will loosen the adhesive part.
Remove the residue with a cleaner or with alcohol.
A. CURVED SURFACE MOUNT
Stick the 3M VHB tape to the mount and place/stick the mount on a curved surface.
Note: this mount can also be used with the remote control's strap!
B. YELLOW FLOATER
Stick the floater with the 3M 300LSE tape
to the camera to keep your camera floatable!
12