Publicité
C L E A N I N G / M A I N T E N A N C E
need to reset the digital thermostat if the heater is
unplugged.
Oscillation (if applicable)
Press the Oscillation Button (
remote control (if applicable) to activate or stop the
oscillation feature.
NOTE: Please do not manually turn the heater on the base.
It is designed to turn only by motorized oscillation.
Timer (if applicable)
Some models are equipped with 24-Hour Auto Shut-off Timer
feature. This allows you to program your heater to shut off
automatically after running a defined time interval (from 0
to 24 hours).
1. Press the Timer Button ( ) once. The indicator light will
begin to blink for 5 seconds. The LCD Display will show
"0" and the "Hr" icon.
2. Turn the Dial Wheel on the control panel to adjust from
0 to 24 to select your desired time interval for the
heater to shut-off automatically. The selected hour will
appear on the LCD Display, and then the Timer indicator
light will stop blinking in 3 seconds to indicate that the
selected timer is activated. The LCD Display will return to
show the preset temperature and mode setting.
3. To cancel the Timer feature, press the Timer Button ( )
twice within 5 seconds, the Timer indicator light will go
off.
NOTE: The timer does not work with the FrostProtect
All manuals and user guides at all-guides.com
) on control panel or
Setting.
TM
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap and water solution.
2. NEVER use abrasive or flammable solvents to clean the
unit.
3. After cleaning, be sure to completely dry the unit with a
cloth or towel.
4. Store heater in a cool, dry location.
5. It is recommended that you store the unit in its original
carton.
TIP: Over time, dust may accumulate on the front grills.
This can be removed by wiping the unit with a damp
cloth.
Publicité
