Kobalt SGY-AIR166 Mode D'emploi page 15

OPERATING INSTRUCTIONS
NOTE: This tool features a power regulator valve.
Rotate the air regulator (D1) until desired output is
achieved. The settings 1, 2, 3, 4 are only for
reference and do not denote a specific power
output. "Setting 1" (one-line symbol) is the lowest
speed while "Setting 4" (four-line symbol) is the
highest speed. Rotate the air regulator (D1) until
the desired setting is lined up with the small steel
ball (K1) on air inlet (L1).
NOTE: This tool also features an exhaust
deflector (J1) that deflects exhaust air downward.
NOTE: The metal guard (C1) can be rotated by
hand to any position to protect workpiece from
sparks.
WA R N I N G
Before adjusting the metal guard (C1),
disconnect tool from air supply.
All manuals and user guides at all-guides.com
15
2
3
4