Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
6. Connect air supply hose to the male plug (L).
Set the working pressure at 90 PSI for best tool
performance.
NOTE: Working pressure refers to the air line
pressure applied to tool when tool is under
working conditions.
1/4 IN. AIR ROTARY TOOL
7. Remove the air inlet protective cap from the
air inlet (J2).
8. Mount a male plug (L) by hand into the
air inlet (J2).
NOTE: Use thread sealant tape on the male plug
and tighten it with a wrench (not included) for
airtight connection. Do not overtighten.
All manuals and user guides at all-guides.com
12
6
7
8
Publicité
