Publicité
Les langues disponibles
Les langues disponibles
GB
1. Introduction
Dear client,
Thank you for having made your choice, you have chosen a professional hoisting product which has been
developed, produced and tested with the greatest of care.
However, it is our duty to draw your attention to the fact that firstly, it is essential to read these instructions for
use carefully and then to execute them before the product is actually put to use.
Further more, we wish to refer you to our website:www.gebuwin.com from which various accessories for this
winch can be purchased e.g. complete cable sets and special drive lubricating grease.
In addition, this website provides download information on the following:
-
service information
user's manual
-
-
GEBUWIN winch dealers
2. Safety Precautions
The winches, TL types, are hand-driven cable winches, to be attached to walls or constructions.
The winches are only to be used for the lifting of goods. Transport (lifting) of persons as well as their
being located under a moving load is not permissible.
The winches have a static safety factor of 4.
The winches are not suitable for:
-
mechanized drive
continuous use
-
use in an area in which aggressive and/or explosive substances are used.
-
Technical alterations and/or the attachment of marginal devices to the winches are permitted only with the
manufacturer's written consent.
Servicing, mounting, possible repairs and the winch maintenance are permitted only by specialized persons
who:
have been appointed and authorized
-
-
have been trained
are familiar with the correct regulations
-
-
always use original parts for repairs
2.1. Winch
The winch is equipped with a load pressure brake which holds the load at any required height and ensures that
it undergoes controlled lowering.
The load pressure brake must not be greased or oiled. This destroys the
brake function!
The stipulated hoisting capacity calculated on the first cable layer, stated on
the type identity sticker must not be exceeded.
The crank may not be removed from the crankhead from a winch under load,
otherwise the brake will not work.
The winch must at least be mounted with the required mounting materials from
chart 1.
Never touch moving parts during use!
Always run the following check before use:
-
brake function
quality of the cable and hoisting parts
-
-
carrier construction
The winch must be tested by a professional at least once a year.
No grease or oil.
8
Publicité
