Publicité
Les langues disponibles
Les langues disponibles
4. Maintenance
The winch must be unloaded for inspection and maintenance tasks.
Inspection and maintenance tasks must be performed by skilled personnel, e.g. via your Gebuwin
dealer.
Inspection/ Maintenance
interval
Before each use
Per quarter
Annually
* Texaco "Texclad premium 2" is recommended by us for the gearing (or equivalent). Orders can be placed
through your Gebuwin dealer or on the website: www.gebuwin.com
5. Troubleshooting
Trouble/Malfunction
The unloaded winch rotates
heavily
The load cannot be held
The load pressure brake does
not function
6. Service
For servicing and/or servicing parts contact your nearest Gebuwin dealer.
The exploded view diagram with regard to the servicing parts is available on the internet website:
www.gebuwin.com
Orders for any necessary servicing parts can also be placed on the website.
Use original servicing parts only; correct functioning cannot otherwise be guaranteed!
7. Environment
At the end of the winch's lifespan, the various winch parts must be disposed of according to the
current environmental regulations.
Tasks
visually check cable and loading hook
-
check the brake function
-
visually check cable and loading hook for any fracture
-
-
check the load pressure brake for wear and tear
When required replace the entire crankhead
Be aware: do not apply lubrication on or near the brake discs
check the cable according to DIN 15020 pg. 2 for wear and tear; also
-
test and maintain the minimum breaking force.
check the tightness of the mounting bolts
-
-
check all the winch parts for wear and tear; replace where necessary;
grease where needed.
check the type identity sticker for clarity
-
Cause
dirt on the gearing
-
during mounting the winch has
-
pulled askew
-
the cable has been incorrectly
wound round the drum which
means the crank turning
direction is incorrect
-
the brake discs are either worn
down or faulty
braking mechanism and/or discs
-
are jammed due to infrequent
use
Solution
clean with a detergent and re-
-
grease
level the mounting surface and re-
-
mount the winch
-
wind the cable correctly around
the drum
-
check and/or renew the entire
crankhead
loosen the brake by hitting the
-
crank in the correct turning
direction with the flat of the hand
12
Publicité
