Whiz application will be used for wireless
connection. The steps for setup are ex-
plained through the application during
setup. You can access the application by
scanning the QR code on the HomeWhiz la-
bel on the appliance. The application can
be obtained from App Store or from Play
Store for Android devices. For details visit
https://www.homewhiz.com/ address.
2. Cooler Compartment Off (Vacation)
Function Key
Press the key for 3 seconds to activate the
vacation function. Vacation mode is activ-
ated and the LED on the key is illuminated.
"- -" shall be displayed on the Cooler Com-
partment temperature indicator and the
cooler compartment does not actively per-
form cooling. You should not keep your
food in the cooler compartment if you activ-
ate this function. The other compartments
continue to cool according to temperatures
set before. Press and hold the key for 3
seconds again to cancel this function.
3. Cooler Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment. Pressing the key will enable
the cooler compartment temperature to be
set at 8 °C, 7 °C, 6 °C, 5 °C, 4 °C, 3 °C, 2 °C,
and 1 °C.
4.*Deodoriser Module Key
Press this key for 3 seconds to activate/de-
activate the deodoriser feature. When the
deodoriser feature is active, the LED on the
respective key is illuminated. When the fea-
ture is active, the deodoriser module will be
operated periodically.
5.Compartment Conversion Key
Pressing compartment conversion key for 3
seconds, the freezer section switches
between cooler, off and freezer modes. If it
is operated as the cooler compartment, the
temperature of the compartment will be set
as 4 °C. In the off mode, compartment tem-
perature indicator shall display "- -".
6.Freezer Compartment Temperature
Setting Key
Temperature setting is made for freezer
compartment. Pressing the key will enable
the freezer compartment temperature to be
set at -18 °C, -19 °C, -20 °C, -21 °C, -22 °C,
-23 °C, and -24 °C.
7.Energy Saving (Display Off) Indicator
Energy saving function is enabled automat-
ically and the energy saving symbol lights
up when the door of the product is not
opened or closed for some period of time.
When the energy saving function is active,
all symbols on the screen other than the en-
ergy saving symbol shall be turned off.
When the energy saving function is active,
pressing any key or opening the door will
deactivate the energy saving function and
the display signals will return to normal.
The energy saving function is a function ac-
tivated ex-factory and cannot be cancelled.
8. Error Status Indicator
This indicator shall be active when your re-
frigerator cannot perform adequate cooling
or in case of any sensor error. On the
freezer compartment temperature indicator
the letter "E" and on the cooler compart-
ment temperature indicator the numbers 1,
2, 3 will be displayed. These numbers on
the indicator specify the service regarding
the failure. If you place hot food in the
freezer compartment or leave its door open
for a prolonged time, an exclamation mark
can be lit. This is not a fault, this warning
shall be removed when the food is cooled
down or when any key is pressed.
9.Quick Freezing Key
When the quick freezing key is pressed, the
LED on the key is illuminated and the quick
freezing function shall be activated. The
freezer compartment temperature is set to
-27 °C. Press the key again to cancel the
function. The quick freezing function will be
automatically cancelled after 24 hours. To
EN / 18