Télécharger Imprimer la page

Porter & Charles SPPS60TM-1 Manuel D'instructions page 33

Publicité

Les langues disponibles

Les langues disponibles

What should I do if the oven doesn't work?
WARNING! Any type of repair must only be
done by a specialised technician. Any repair
done by a person not authorised by the
manufacturer is dangerous.
You do not need to contact Technical Assistance
to resolve the following questions:
• The display is not showing! Check if:
- The time indication has been switched off
(see section on Basic Settings).
• Nothing happens when I press the keys!
Check if:
- The Safety Block is active (see section on
Basic Settings).
• The oven does not work! Check if:
- The oven's power is switched on.
- The door is completely closed. The door
should close with an audible click.
- There are any foreign bodies between the
door and the cavity front.
• When the oven is operating I can hear some
strange noises! Check if:
- There is any electrical arcing inside the oven
caused by foreign metallic objects (see
section on type of ovenware).
- The ovenware is touching the oven walls.
- There are any loose items of cutlery or
cooking tools inside the oven.
• The food doesn't heat up or heats very
slowly! Check if:
- You
have
ovenware.
- You have selected the correct operating
times and power level.
- The food you have put inside the oven is a
larger amount or colder than you usually put
in.
inadvertently
used
• The food is too hot, dried out or burnt!
Check if you selected the correct operating
time and power level.
• I hear some noises after the cooking
process is finished! This is not a problem.
The cooling fan keeps on working for some
time. When the temperature has dropped
sufficiently, the fan will switch itself off.
• The oven switches on but the interior light
does not go on! If all the functions work
properly it is probable that the lamp has
blown. You can keep on using the oven.
Replacement of the light bulb
To substitute the light bulb, proceed as follows:
- Switch off the oven's power circuit.
- Unscrew and remove the glass light cover
(1).
- Remove the halogen light bulb (2). Warning!
The bulb may be very hot.
- Fit a new 12V / 10W halogen bulb. Warning!
Do not touch the light bulb surface
directly with your fingers because you
may damage the bulb. Follow the lamp
manufacturer's instructions.
- Screw the glass light cover into place (1).
- Connect the oven again to the power
supply.
metal
NOTE: Replacement bulbs can be ordered from
EURO-PARTS 1-866-722-2262
33 | EN

Publicité

loading