Publicité
NOTE: To ensure proper operation of the cleaner, verify that the rubber O-ring
is in place and tighten all knobs.
1
O-ring
To attach the lower handle, align with power nozzle opening
in the base of the cleaner (Diagram 1). Push together
firmly, verify the rubber O-ring is in place and turn the knob
clockwise to tighten (Diagram 1a).
3
O-ring
To attach the upper handle, align with middle section of cleaner, verify the rubber O-ring is in place and push firmly into
place (Diagram 3). Turn the knob clockwise to tighten (Diagram 3a). To keep the cord out of the way while vacuuming, snap
it into the cord clip on the back of the upper handle (Diagram 4).
WARNING: Fully assemble before operating.
1
Front
Plug cord into electrical outlet. Turn
power switch to the high suction
position for normal cleaning and the
low suction position for cleaning
delicate rugs or wood flooring.
8
All manuals and user guides at all-guides.com
HOW TO ASSEMBLE
1a
3a
HOW TO OPERATE
2
Tilt the cleaner back before you
start vacuuming. At the same
time, use your foot to press the
nozzle down onto the carpet.
2
O-ring
To attach the bag, hold the handle, verify the rubber O-ring
is in place and firmly push into lower handle (Diagram 2).
Turn the top knob counterclockwise to tighten and snap bag
clip onto lower handle (Diagram 2a).
Wrap cord on storage cleats
when you have finished
vacuuming. The cord cleat also
rotates for quick cord removal.
2a
4
CORD STORAGE
3
Publicité
