Malm Fireplaces Fire Drum GF-2 Instructions De Montage Et D'installation page 8

1. Place the legs of the grate into the leg holders.
2. Spread the vermiculite fi rst, no more than 1/4" thick,
over the burner area.
Spread glowing embers evenly over the vermiculite.
After lighting the unit spread the embers to acheive
an even coal effect.
3. Place fi re logs as shown, using alignment knobs on
the logs.
4. Light the pilot following lighting instructions.
Turn the valve to on and the burner should light.
All manuals and user guides at all-guides.com
GAS LOG SETUP
GF2/GF3 Page - 8
GF2/3 5/1/15