Publicité
Les langues disponibles
Les langues disponibles
GENERAL SAFETY
1. Always shut off the gas supply and make sure that the heater is cool before starting any
servicing operation.
2. Always check for leaks after servicing.
3. Always check for correct combustion and ventilation air fl ow. The fl ow of combustion and
ventilation air must not be obstructed.
4. Always check that the appliance area is clear and free from combustible materials, gaso-
line, and other fl amable vapors and liquids.
PERIODIC CHECKS
1. Keep the burner and control compartment clean by brushing and vacuuming at least once
a year.
2. The fl ame patern should be checked periodically. The fl ame color should be blue with yel-
low tips. If needed adjust the air shutter to provide a proper fl ame. See Figure F.
3. A qualifi ed service person should Inspect the appliance vent system prior to use and at
least annually, to ensure that the fl ow of combustion air is not obstructed.
4. If you are unsure how to perform these maintenance procedures have a qualifi ed fi eld ser-
vice person check the unit at least annually.
NOTE: During the fi rst few fi res the odor of paint or oils remaining from manufacturing are
likely to release an odor. This is normal and will stop as soon as the paint has curred.
4. If for any reason a log should break it must be replaced with the same log. See the log
diagram for the exact replacement log needed. The position of the logs must be as shown
in the diagram.
CARE OF FINISH
1. The matte black fi nish can be wiped clean with a damp cloth. If the fi nish becomes marred
or scratched it may require touch up spraying. Use Stove Bright Flat Black spray. This is
available from your dealer or from Malm direct.
2. If your unit is porcelain enamel use any glass cleaner to wipe the unit clean. Minor
scratches can be polished with most non-abrasive auto polish. If the porcelain should
become chipped or severly damaged an enamel touch up is available from your dealer or
Malm direct.
All manuals and user guides at all-guides.com
MAINTENANCE INSTRUCTIONS
GF2/GF3 Page - 10
GF2/3 5/1/15
Publicité
