K MODE button page 12, 16, 17
Press to: Select the radio band (FM/AM)*
select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
L
(LIST/BROWSE) button page 10,
12
To list up (Radio); enter the Quick-BrowZer
mode (CD/USB).
M SCRL (scroll) button
To scroll the display item.
N Number buttons
CD/USB:
(1): REP page 13, 15, 17
(2): SHUF page 13, 15, 17
(3)/(4): ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
(5): DM+
Improves digitally compressed sound,
such as MP3.
To activate the DM+ function, set
"ON." To cancel, set "OFF."
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
O DSPL (display) button page 13, 14, 16
To change display items.
P AUX input jack page 20
To connect a portable audio device.
Q RESET button page 6
R Z (eject) button
To eject the disc.
S Disc slot
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
1
/
from the unit. Remove the insulation film before
use (page 6).
w; < (.)/, (>) buttons
To control CD/radio/USB, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
wa MENU button
To enter menu.
ws ENTER button
To apply a setting.
wd VOL (volume) +/– button
To adjust volume.
wf ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wg SOUND button
To enter sound setting.
wh
(LIST/BROWSE)/CAT*
page 10
wj M (+)/m (–) buttons
To control CD/USB, the same as (3)/(4)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
wk Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 In the case of a CD changer, HD Radio tuner or
SAT tuner being connected; when (SOURCE) is
pressed, the connected device ("HD," "XM" or "SR")
will appear in the display, depending on which
device is connected. Furthermore, if (MODE) is
pressed, you can switch the changer, HD Radio
tuner band or SAT tuner band.
*2 When the SAT tuner is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
2
button
9