Using the toothbrush
1. Remove the cap. (Fig. 2)
2. Confirm that the brush is fixed firmly. (Fig. 8)
3. Place the toothbrush in your mouth.
•
When using the toothbrush, especially with
toothpaste applied, place the brush head in the
mouth before operating to prevent splattering.
4. Press the power switch firmly to operate the
toothbrush.
•
Press the power switch firmly. If you press the
power switch lightly, the toothbrush may operate
only while you are pressing.
Press the power switch with the ball of the
•
finger.
•
Do not press with a fingernail. Doing so may
tear the rubber of the power switch.
5. Brush your teeth by moving the main unit by
hand.
Brush by moving the toothbrush in the same
•
way as when you brush by hand. Just applying
the toothbrush to teeth cannot fully remove
plaque, so it is recommended that you move the
toothbrush.
•
Do not apply the brush head to teeth or gums
too strongly.
6. When finished brushing, stop the motion by
9