Parts identification (Fig. 1)
Main unit
Power switch [0/1]
Battery cover
Attachments
Dual-Edged Brush (x1)
Inverted V-shaped bristles for interdentium
Extra fine bristles for between teeth and gums
Cap
Attaching and removing the cap
Attach and remove the cap straight. (Fig. 2)
6
Attaching the brush head
1. Align the mark on the brush head with the mark
on the main unit, and rotate it in the direction of
the arrow until it clicks. (Fig. 3)
Inserting the brush head without aligning the
•
mark on the brush head with the mark on the
main unit may damage the brush head or the
main unit.
•
Tightening it too strongly may cause
deformation and damage of the main unit and
the brush head.