Zycoo SC15 Guide D'installation Rapide page 5

Web Login
6
Connect network cable and power supply (if PoE is not enabled on the network cable).
7
Wait for 30 seconds then press and hold the RST button for 5 seconds and release, it
will announce the IP address obtained from the DHCP server. If there's no DHCP
server or DHCP fails, it will use default IP 192.168.1.101. In the browser address bar
input the IP address you hear to open its web management interface. Default
username and password admin/admin.
System Reset
To reset factory defaults, press and hold the RST button for 10 seconds (5 seconds for IP
address announcements) and release, now you should hear voice prompts "Resetting
factory defaults, rebooting...", it means the speaker will now reset.
Bracket
Ceiling
3