Zycoo SC15 Guide D'installation Rapide page 3

Installation Method 1
1
Cut a hole in the ceiling with 206±1 mm diameter.
2
Connect network cable and power supply (if PoE is not enabled on the network cable),
and other cabling if required.
3
Detach the metal mesh (adsorbed by magnets).
4
Adjust the clips and place the back end of the ceiling speaker into the mounting hole,
adjust the clips again for being able to clamp the ceiling.
5
Tighten the screws in order to tighten the clamping of the clips with the ceiling, and then
cover the metal mesh.
Ceiling
English
φ206mm
Metal Mesh
1