Publicité
Les langues disponibles
Les langues disponibles
Select Cycle
6
Option
Cycle Selector
7
Start/Pause
8
selection button
Power button
9
WF203ANW-02463A-02_EN.indd 13
Press these buttons to select different cycle options.
Delay Start - Any cycle can be delayed for up to 12 hours in one-hour increments.
The displayed hour indicates the time at which the wash will be started.
Extra Wash - Add additional time to the wash for better stain removal.
Extra Rinse - Add an additional rinse at the end of the cycle to more thoroughly
remove laundry additives and perfumes.
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
To minimize wrinkling of laundry, select the Perm Press cycle.
Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.
Normal - For most fabrics including cottons, linens, and normally soiled
garments.
Whites - For white fabrics with or without bleach.
Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally
soiled garments.
Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to
150°F to eliminate bacteria.
If Pause is selected during the heating portion of the Sanitize Cycle, your
Washer door will remain locked for your safety.
Rinse + Spin - Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Spin Only - Provides a spin to remove more water.
Press to pause and restart programs.
Press once to turn your Washer on, press again to turn your Washer off. If
the Washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.
Washing a load of laundry _13
2007-07-02 ¿ÀÈÄ 8:14:57
Publicité
