Using Ps Vr - Sony CUH-ZVR1 Mode D'emploi

Using PS VR

Used with your PS4™ system and PlayStation ® Camera, PS VR
brings you the excitement of virtual reality. You can interact
with games more directly because the camera captures the
position, angle, and movement of the VR headset.
Be sure to always update your PS4™ system software to the
most recent version.
Play Area
Limit your use of PS VR to within the Play Area. The height of
the Play Area depends on the range captured by the camera.
The width and depth of the Play Area are as follows.
Approx.
1.9 m
(6.2 ft)
: Range captured by the camera
Clear an area larger than the Play Area of all obstacles before
using PS VR.
8
PlayStation ® Camera
Approx.
0.7 m
(2.3 ft)
Play Area
Approx.
3.0 m
(9.8 ft)
Follow the instructions on the PS VR setup screen to adjust
the camera position and angle, so that you are in the best
position (in the center of the Play Area) to play in VR mode. If
you go outside of the Play Area while using VR mode, a
warning will appear on the VR headset screen.
Hint
If the VR headset is not detected correctly, press and hold the
(PS) button on the controller, and then select [Adjust
PlayStation VR]
that appears. Adjust the camera position and angle.
Your position while using the VR headset
Remain seated whenever possible. If an application requires
you to stand while wearing the VR headset, follow the
application instructions carefully, and maintain awareness of
your surroundings.
PS VR settings
0 m
Approx.
To configure PS VR settings, go to the PS4™ system's function
0.6 m
screen, and then select
(2.0 ft)
[PlayStation VR].
Hints
• These settings are available only when PS VR is connected to the
PS4™ system.
• You can also configure some settings from the quick menu that
appears when you press and hold the
controller.
[Confirm Your Position] from the quick menu
(Settings) [Devices]
(PS) button on the