Moisture Condensation - Sony CUH-ZVR1 Mode D'emploi

• When using the stereo headset or headphones in
particularly dry air conditions, you may sometimes
experience a small and quick (static) shock on your ears.
This is a result of static electricity accumulated in the body,
and is not a malfunction of your stereo headset or
headphones.
• Follow the precautions below to help prevent the product
exterior from deteriorating or discoloring.
– Do not use solvents or other chemicals on the product.
– Do not allow rubber or vinyl materials to be in prolonged
contact with the product.
Wearing the VR headset
• It is important that you place the VR headset on your head
properly during use.
– To see instructions on how to wear the headset, go to the
PlayStation 4 system's function screen, and then select
®
(Settings) [Devices]
– Do not overtighten the adjustment dial (
– You can continue to wear your glasses while wearing the
VR headset. When adjusting the scope position
( page 10), be careful not to let the internal lenses
( page 11) and your glasses come into contact with
each other.
• Regularly check the VR headset's fit to ensure it is being
worn properly.
VR headset screen
• Black (dark) pixels and continuously lit pixels may appear in
certain locations on the screen. The appearance of such
spots is a normal occurrence associated with screens and is
6
[PlayStation VR].
page 11).
not a sign of a system malfunction. Screens are made using
highly precise technology. However, a very small number of
dark pixels or continuously lit pixels may exist and color
irregularities or brightness irregularities may be visible on
each screen.
• Keep the VR headset's attachment sensor (
from any obstacles. If the attachment sensor is blocked, the
screen will not turn off automatically even if you remove the
headset. If an image appears on the screen for an extended
period of time, it might cause a screen burn and a faint
image might remain permanently on the screen.
Never disassemble or modify this product or
accessories
Use this product and accessories according to the instructions
in this manual. No authorization for the analysis or
modification of this product, or the analysis and use of its
circuit configurations, is provided. Disassembling will void the
product warranty. Additionally, there is a risk of fire, electrical
shock or malfunction.

Moisture condensation

If PS VR is brought directly from a cold location to a warm one,
moisture may condense inside the product. Should this occur,
the product may not operate properly. In this case, turn off
the VR headset and unplug the AC power cord from the
electrical outlet. Do not use the product until the moisture
evaporates (this may take several hours). If the product still
does not operate properly, visit our website (
page 11) free
back cover).