Masquer les pouces Voir aussi pour PlayStation VR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using PS VR

• Used with your PS4™ system and PlayStation ® Camera,
PS VR brings you the excitement of virtual reality. You can
interact with games more directly because the camera
captures the position, angle, and movement of the VR
headset.
• Be sure to always update your PS4™ system software and
PS VR device software to the most recent version.
• Be sure to connect your VR headset to the supplied
CUH-ZVR2 processor unit. The headset will not work if
connected to a CUH-ZVR1 processor unit.
Play Area
Limit your use of PS VR to within the Play Area. The height of
the Play Area depends on the range captured by the camera.
The width and depth of the Play Area are as follows.
Approx.
1.9 m
(6.2 ft)
: Range captured by the camera
8
PlayStation ® Camera
Approx.
0.7 m
(2.3 ft)
Play Area
Approx.
3.0 m
(9.8 ft)
Clear an area larger than the Play Area of all obstacles before
using PS VR.
Follow the instructions on the PS VR setup screen to adjust
the camera position and angle, so that you are in the best
position (in the center of the Play Area) to play in VR mode. If
you go outside of the Play Area while using VR mode, a
warning will appear on the VR headset screen.
Hint
If the VR headset is not detected correctly, press and hold the
(PS) button on the controller, and then select [Adjust
PlayStation VR]
that appears. Adjust the camera position and angle.
Your position while using the VR headset
Remain seated whenever possible. If an application requires
you to stand while wearing the VR headset, follow the
application instructions carefully, and maintain awareness of
your surroundings.
PS VR settings
To configure PS VR settings, go to the PS4™ system's function
0 m
screen, and then select
Approx.
[PlayStation VR].
0.6 m
(2.0 ft)
Hints
• These settings are available only when PS VR is connected to the
PS4™ system.
• You can also configure some settings from the quick menu that
appears when you press and hold the
controller.
[Confirm Your Position] from the quick menu
(Settings)
[Devices]
(PS) button on the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cuh-zvr2

Table des Matières