Publicité
Les langues disponibles
Les langues disponibles
RADIO OPERATION
BAND TAPE
CD/MD IN
2
1
2
3
4
1
T
Press PWR to turn the unit on.
The radio frequency appears.
Press
BAND
to select
the band from
among
FM1, FM2, FM3 snd AM.
The band indicators appear cyclically in order.
(FM1,
FM2
and
FM3
share
the
same
frequency range.)
Band
Frequency
indicator
indication
1
Press
(more
than
2 seconds)
either
TUNE YorTUNE
Atotuneinthedesired
station.
The unit star@ scanning and tunes in a station
automatically
(seek tuning).
Press TUNE 7 to decrease and TUNE
A
to
increase the frequency.
Press the button again to cancel seek tuning.
Repeat the procedure until the desired station
is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE Y or TUNE A, the frequency
decreases or increases step by step.
Adjust the volume
with +/-.
PWR
TUNEV/A
LO
To
turn the unit off
Press PWR.
Note
The unit turns on in the last selected mode when
you turned off the unit with the exceptions
of
pressing the following buttons.
Pressing TAPE turns on the unit in Tape Play
mode.
Pressing BAND turns on the unit in Radio mode.
Pressing CD/MD IN turns on the unit in CD/MD
IN mode.
Switching modes
When
the unit is in Radio mode, inserting
a
cassette switches the unit to Tape Play mode
automatically.
LO (local/DX) button
You can use Local mode when you wish to tune
in only strong stations during seek tuning.
In
Radlio mode, press LO to select Local mode. The
"LO indicator lights up.
Press LO to deactivate Local mode and switch
to DX (distance) mode.
The "ST" (stereo) indicator lights up when the
tuned-in station is broadcasting
in stereo and
the reception is good.
ENGLISH
6
Publicité
