Télécharger Imprimer la page

Aiwa CT-X409 YU Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

NOTE
Welcome
Thank you foryourpurchasing
this AIWAproduct.
To optimize the performance
of this unit, please
read through this manual carefully.
In addition to this operating instructions manual,
be sure to refer to the separate installation
and
connections
manuals as well.
PRECAUTIONS
This unit is designed to be operated on a 12-volt
DC negative-ground
electrical system only.
To prevent
short-circuiting,
disconnect
the
negative car battery terminal until the unit has
been mounted and connected completely.
When replacing the fuse, be sure to use one
whose amperage
rating is identical.
Use of a
fuse of higher amperage
may cause serious
damage to the unit.
Keep screwdrivers,
etc. and other metallic or
magnetic objects away from the playback head.
When your car was parked m direct sunlight
resulting in a considerable
rise in temperature
inside the car, allow the unit to cool off before
operating it.
Keep the volume at such a level that you can
hear outside warning
sounds (horns, sirens,
etc.).
Notes
on cassettes
.
Do NOT expose cassettes
to direct sunlight,
extremely high or cold temperature
or mo[sture.
Keep cassettes away from equipment with built-
in magnets to avoid unwanted
noise or loss of
sound quality.
Do NOT touch the tape of a cassette, as any dirl
or dust will contaminate
the heads.
Be sure to remove any cassette from the unit if
you are not using it.
This equipment
has been tested and found to
comply with the Iimlts fora Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits
are designed
to provide
reasonable
protection
against
harmful
interference
in a
residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance
with the instructions,
may
cause
harmful
interference
to
radio
communications.
However, there is no guarantee
that interference
will not occur in a particular
installation. If this equipment does cause harmful
interferenceto
radio ortelevision reception, which
can be determined
by turning the equipment
off
and on, the user is encouraged
to try to correct
the interference
by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase
the
separation
between
the
equipment and receiver.
— Connect the equipment
into an outlet on
circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced
radio/
TV technician for help.
CAUTION
Modifications oradjustmentsto
this product, which
are not expressly approved by the manufacturer,
may void the user's right or authority to operate
this product.
Caution on the transit protection pad
The unit is shipped with a transit protection pad
in the cassette compartment.
Be sure to press EJECT A to remove the pad
before operating the unit.
Transit protection pad
i
ENGLISH

Publicité

loading