Publicité
Les langues disponibles
Les langues disponibles
as described in this section. If your
product fails any of these checks,
contact your service agent to get it
repaired.
CAUTION:
repair work on the machine
requires special training. This is
especially true of the machine's
safety equipment. If your machine
fails any of the checks described
below you must contact your
service agent. When you buy any
of our products we guarantee the
availability of professional repairs
and service. If the retailer who sells
your machine is not a servicing
dealer, ask him for the address of
your nearest service agent.
To do a check of the blades
1. Stop the product.
a) If you have a gasoline operated
product, switch off the engine and
disconnect the spark plug cap from the
spark plug.
b) If you have a battery operated product,
switch off the motor and remove the
battery.
2. Make sure that the product has stopped
completely.
3. Put on protective gloves.
4. Make sure that the blades are not
damaged or bent. Always replace a
damaged or bent blade.
5. Make sure that the screws to the blades
are not too loose. If a screw is loose,
tighten sufficiently.
Note:
Do not tighten the screws to the
blade too much. Too tight screws prevent
blade movement.
1917 - 003 - 03.11.2023
All servicing and
Hot surface
The gear housing gets hot when the product
has been in use. Do not touch the gear
housing to avoid burning yourself.
Safety instructions for maintenance
Read the warning instructions that follow
before you use the product.
•
Always stop the product before you work
on any part of the cutting equipment. If
you have a gasoline operated product,
disconnect the spark plug cap from
the spark plug. If you have a battery
operated product, remove the battery.
Check that the cutting equipment has
stopped completely before you start any
work on it.
•
The transport guard should always be
fitted to the cutting attachment when the
product is not in use.
•
Make sure the cutting attachment has
stopped before cleaning, carrying out
repairs or an inspection. If you have a
gasoline operated product, disconnect the
spark plug cap from the spark plug. If you
have a battery operated product, remove
the battery.
•
Always wear heavy-duty gloves when
repairing the cutting attachment. This is
extremely sharp and can easily cause cuts.
•
Store the product out of reach of children.
•
Use only original spare parts for repairs.
7
Publicité
