AENO SM2 Mode D'emploi page 9

EN The AENO SM2 steam mop is a household device designed for cleaning
hardwood floors, laminate, marble, tiles, removing heavy soiling on glass, metal
and other heat resistant surfaces, furniture upholstery.
Technical specifications
Rated voltage: 220–240 V (AC); frequency: 50/60 Hz. Rated power: 1200.0 W.
Water tank capacity: 275 ml. Continuous operation time (with a full tank): up to
24 min. Water consumption: up to 25 g/min. Steam pressure: up to 3 bar (max).
Steam temperature: approx. +130 °C. Steaming modes: 3. Heating time: approx.
15 sec. Dimensions (L×W×H): 140×300×1140 mm. Operating conditions:
temperature – 0–50 °C, humidity 20–70 %. Storage conditions: temperature –
0–50 °C, humidity 20–70 %. Degree of protection: IPX4.
Scope of supply (Figures A, B, C, D)
Handle (1), extension tube (2), steam mop (carrying handle (3), device body (4),
water tank (5), water tank lid (6), steam release button (7), steam LED
indicators (8), steam mop head button (9), steam mop head (10)), microfiber
pad (2 pcs.) (11), nylon brush (2 pcs.) (12), brass brush (13), jet nozzle (14),
squeegee (15), measuring cup (16), quick start guide, guarantee card.
Limitations and Warnings
Make sure that the power supply voltage corresponds to the appliance
technical specifications. Unplug the steam mop before filling the water tank,
during cleaning and after use. Do not immerse the appliance, power cord,
power plug, steam mop head or nozzles in water or any other liquid. Do not
place the power cord near hot objects. Do not use an extension cord. To prevent
burns during operation, be careful and do not touch the jet nozzle; do not direct
the steam mop towards people, animals or plants. Do not let steam come into
contact with devices containing electrical components. This appliance is not
9 aeno.com/documents