Moulinex FG3708 Mode D'emploi page 8

• Once the minutes are set, wait for the flashing to stop and the set time
will be validated. Otherwise, press the
• The programming will have to be repeated in case of a blackout or if the
coffee maker is unplugged.
• PLEASE NOTE: You can set or adjust the time at any moment. Hold the
button down for a minimum of 3 seconds
the screen, you may adjust the time using the H and Min buttons.
Program mode functioning
• In order to program your coffee maker, press the PROG button once.
• Set the hour and minutes according to the time you wish your coffee
maker to start (please refer to "Programming", above).
• Validate the set time by pressing the PROG button once more.
• The screen will display the set time and the green light signal (l) will
turn on.
• In order to display the current time again, briefly press the
• At the set time, the red light signal will turn on and the coffee maker
will start.
WARNING: The set program is automatically deactivated at the end
of the coffee cycle; however, the set time is saved. Reactivate the set
program every day by pressing on the PROG button. In order to set a
different time, please refer to paragraph "Using the appliance in the
Program Mode".
It is possible at all times:
• Turn your coffee maker ON or OFF by pressing the
• Cancel the programming by pressing the PROG button for 2 seconds.
When you do so, the green light signal (l) will turn off.
• In order to reactivate the program on your coffee maker, press the
PROG button once.
• To change the set time, press the PROG button once more.
Manual functioning
Follow figures 1 to 8.
• Press the
maker will start functioning.
• Press the
8
button. The red light signal will turn on and the coffee
button once more to stop functioning.
(j) button once.
. Once the time flashes on
button.
button.