Heitronic 38277 Instructions D'installation Et D'utilisation page 7

5. Installation/Commissioning
Transformer connection

This product can only be installed by a qualified electrician.

The connection lines in the building must be disconnected before installation and secured against being
switched back on. For this, trip the corresponding fuse switch in the building installation.

Make sure that the surface is suitable for permanently and reliably taking the weight of the product.

No connect the connection lines of the primary and secondary sides with the respective terminals. The
brown (or black) cable is generally the phase conductor - connect this to the terminal marked with "L".
The blue conductor must be connected to the terminal marked with "N".
Important: All connection points must display a protection rating of min. IP67.

Do not bend the cables; make sure that the cables are not subject to tension or torsional forces.
Protect all cables and insulation against possible damages.

Check proper connection once again.

Switch the building installation's fuse switch back on.
Use of optional accessories
Connector:
1
3
All manuals and user guides at all-guides.com
2
4
2 of 5 | Dated 18.05.2016