AIPTEK PocketCinema V150W Mode D'emploi page 8

All manuals and user guides at all-guides.com
User's Manual
Operating Range with Remote Control
Note: Actual operating range may slightly differ from the diagram. Additionally, a
weak battery reduces or eliminates the operating range of the remote control.
Getting Started
Charging the product
The projector is built in a Li-Polymer battery for
mobile use. Please charge the projector for 8
hours prior to its first use. Repeat charging will
take around 4 hours.
The battery will be charged only when the
projector is not in use (Power off). Connect one end of the supplied AC adapter to DC
IN jack and the other end to a power outlet to start charging.
Exchange the plug (EU, US and etc.) of AC adapter that accommodates the type of
power outlet in your country if it's different.
Charging LED Indicator
During charging, the LED on Power button turns Orange. It turns to Green when the
battery is fully charged.
Turn On / Off the Projector
Push the Power button for 2 seconds to turn on the projector.
To turn off the projector, push the Power button downward for 2 seconds.
Standby mode: Push the Power button for 1 second to turn on/ off the projector lamp
for a short break to save the battery and system reboot time. (The
LED on buttons are still on when the projector is in standby mode.)
7m / 22.97 feet
Page 8