Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
User's Manual
Projecting from Memory
Projecting from Internal Memory
The projector has 2 GB internal memory and 1.2 GB is free for file storage. Please
download media files from your PC or Notebook to the internal memory for projection:
1. Turn on the PC and the projector.
2. Connect the micro-USB port of the
projector to the PC or Notebook via USB
cable. Once the connection is established,
the screen and ventilation fan will
automatically turns off to save the power.
Now the projector is in mass storage
mode.
3. You can copy the pictures, videos, music,
Windows Office (PowerPoint, Word, and Excel), and PDF files from your PC to the
internal memory or delete the files on the internal memory.
Note: 1. The remote controller is not applicable when the projector is connected
to PC or notebook.
2. Please refer the supported file format in 'Functions and Operations'
(P.15)
Projecting from External Memory
1. External SD/SDHC/SDXC card slot
The memory card slot is built in to reading SD, SDHC,
and SDXC card up to 128 GB. Gently insert the card
by following the direction shown below until it reaches
the bottom of the slot. To remove the memory card,
gently push the top edge of the card and pull it out.
2. USB Device
The projector can project the content from USB device
such as USB memory stick or Hard Disk Drive (with its
own power supply).
Note: External memory source will be the default memory displayed on the playlist.
When both SD/SDHC card and USB memory stick are in use, USB memory
stick will be the default memory displayed on the playlist.
Selecting the memory source
Use the navigation keys to select 'Setting' and press ◎ (OK) to enter the
submenu. Select 'Memory' and press ◎ (OK) to enter the memory options. Select
your preferred memory source and confirm with ◎ (OK). Press
Main Menu.
Page 14
(Exit) to return to
Publicité
