Alfa Laval Micro Instructions D'installation, D'entretien Et D'utilisation page 8

Alfa Laval Micro
Installation, service and operating instruction
1 General information
Alfa Laval Micro is a complete, ready-to-install heating network substation for hot water and heating. It is
designed for buildings with a connection to a heating network. Alfa Laval has years of experience in heating
network technology and has developed Alfa Laval Micro with well-planned pipe work and with all components
easily accessible for inspection and possible future servicing.
1.1 Comfort
Alfa Laval Micro has fully-automatic temperature control for heating and hot water. The hot water is controlled
and maintained at the desired temperature. The heating is controlled in relation to desired room temperature.
1.2 Installation
Compact dimensions, light weight, well arranged plumbing and factory-complete internal wiring – all make
installation very simple. A pre-programmed control unit and a power cable already fitted with a plug make
things even simpler to allow immediate start-up.
Micro is designed for hanging on wall and is mounted on an insulated frame and includes an insulated cover.
Better insulation means less energy usage and better energy efficiency.
1.3 Long-term security
The heat exchanger plates and all piping are manufactured in acid-resistant stainless steel. All components are
closely matched and carefully tested for function in accordance with Alfa Laval's quality assurance system
ISO9001:2008.
For future servicing requirements, all components are easily accessible and individually replaceable.
1.4 CE-marking
Alfa Laval Micro follows the rules and legislation
To maintain the validity of the CE marking, only identical replacement parts must be used.
All manuals and user guides at all-guides.com
specified in the Declaration of Conformity, see
6
section 23.