Alfa Laval Micro Instructions D'installation, D'entretien Et D'utilisation page 42

Alfa Laval Micro
Installation, service and operating instruction
12.3 CM721– Installer parameters table
12.3.1 CM721- Category 1: Room Thermostat Settings
Parameter Parameter
No.
AM-PM / 24hr 1:CL
Display
Reset Time/ 2:rP
Temp Program
Auto 3:tC
Summer/Winter
Time Change
LCD Backlighting 5:bL
Upper Temp Limit 6:uL
Lower Temp Limit 7:LL
Optimisation 8:OP
Temperature 12:tO
Offset
Proportional 13:Pb
Band Width
Scheduled 19:SP
Maintenance
Alert Period
(months)
Reset 20:FS
Parameters to
Factory Defaults
Note
1) Remember to always press the green button to confirm that you want to store your new Installer Set-Up
setting. To exit the Installer Mode press the AUTO or MAN button.
All manuals and user guides at all-guides.com
Factory Default Setting
Display Description
12 hr. – AM/PM clock
12
display format
1 Time / Temp profile set
to factory default
Changes to 0 when
one of the time/temp
profiles are changed
1 Auto Summer/Winter
Time Change Enabled
1 Backlighting Enable
35 35°C Upper Temp.
Limit
5 5°C Lower Temp. Limit
0 Optimisation Disabled
0 No temperature offset
1.5 Proportional band of
1.5 degrees
0 Scheduled
Maintenance Alert
Period disabled
1 All settings at factory
defaults
Changes to 0 when
one of the parameter
is changed
40
Optional Setting
Display Description
24 24 hr. clock display format
0 Time / Temperature are as
programmed
To restore the factory
profile set to 1
0 Auto Summer/Winter Time
Change Disabled
0 Backlighting Disabled
21 to 34 21°C to 34°C adjustment in
1°C steps
5 to 21 6°C to 21°C adjustment in
1°C steps
1 Optimisation Enabled
-3 to +3 -3°C to +3°C adjustment in
0.1°C steps
1.6 to 1.6°C to 3.0°C adjustment
3.0 in 0.1°C steps
0 to 48 0 to 48 months adjustment
in 1 month steps
0 Settings are as modified
above
To restore the factory
profile set to 1