Alfa Laval Micro Instructions D'installation, D'entretien Et D'utilisation page 48

Alfa Laval Micro
Installation, service and operating instruction
15 Differential pressure control valve, DPC
Adjusting the DPC must be carried out by an authorized service technician.
15.1 Setting the DPC valve
Set the valve to the differential pressure 25kPa.
Start with the valve at minimum position and then open with 3 numbers of turns.
Use a 4mm hexagonal key.
NOTE: Always start from the minimum position of the valve, before making new settings.
Picture 33
15.2 Flow rate graph of the DPC
Picture 34
All manuals and user guides at all-guides.com
46