Publicité
SPRAYER COMPONENTS & USE INFORMATION, Continued
WAND CLIP
The wand can be attached to the pump
tirez
handle using the wand clip.
e
de
a une
4 STAGE FILTERING SYSTEM
er
This backpack sprayer is equipped with a 4 stage filtering system (see figure 1).
Stage 1 is a filter basket incorporated into the tank opening where fluid is
added. Stage 2 and 3 filters are located at the inlet of the pressure cylinder.
Stage 2 is a removable In-Tank filter. Stage 3 is a removable filter cartridge
integrated into the pressure cylinder. Stage 4 is a removable filter incorporated
into the shut-off assembly. Periodic cleaning of these filters is recommended to
insure consistent fluid flow through the sprayer. This will also reduce sprayer
component wear.
Stage 3 filter cartridge cleaning requires removal of the entire pressure cylinder
assembly (see section "disassembling and repairing the pressure cylinder").
Once the pressure cylinder is removed the stage 3 filter can be removed for
cleaning (see figure 3). Periodic cleaning of the stage 2 filter is highly
recommended and will reduce the need to perform this disassembly. It is best
to have no or minimal fluid in the tank before removing and reinstalling the
stage 2 In-Tank filter. The In-Tank filter needs to be oriented in a specific way
when inserted into the pressure cylinder base (see figure 2).
The stage 4 filter is a removable filter incorporated into the inlet side of the
shut-off valve (see section "disassembling and repairing the shut-off valve") .
Make sure pressure is released before detaching the hose from the shut-off. It
is best to have no or minimal fluid in the pressure cylinder before removing
and reinstalling the stage 4 shut-off filter as fluid can leak from the hose.
Figure 2 Stage 2 (removable In-Tank filter)
Guide edge facing away
from pressure cylinder
la
FILLING THE SPRAYER
Make sure the filter basket is in place to keep debris from entering the tank.
tes
Determine the amount of mixture needed for your application. Add the proper amount of water to the
age
tank. Add the proper amount of chemical to the tank (check the chemical label for proper ratio of
chemical). Stir mixture in tank with a clean utensil (like a paint stirrer). The tank will hold the 4-gallon
née
(15.1L) capacity plus the chemical.
nt.
It is not necessary to completely fill the sprayer tank with each use. You can fill the tank with only the
e
amount needed for each application.
Always follow the manufacturer's instructions included on their product label.
All manuals and user guides at all-guides.com
Figure 3 Stage 3 (removable filter cartridge)
Guide edge on
Filter cartridge in
pressure cylinder
pressure cylinder base
4E
Stage 1
Figure 1
(filter
basket)
Stage 2
(removable
Pressure
Cylinder
In-Tank filter)
Stage 3 (removable
filter cartridge)
Stage 4
(Removable
Shut-off filter)
Filter cartridge removed
Publicité
