Publicité
APPLICATIONS & USE FOR YOUR SPRAYER
Avoid using a sprayer for general cleaning purposes if plant protection or herbicide chemicals
have already been used in the sprayer. If a sprayer has been used for plant protection or as an
herbicide, clean the sprayer completely (see cleaning section) before using.
Plant Food: Use different spray patterns for optimum foliage feeding or for fungicide and
pesticide application.
Herbicides: Reduce weeds and unwanted plants but avoid using the same sprayer for plant
feeding or protection without thoroughly cleaning (see cleaning section) the sprayer first.
General Household Use: Apply detergents, vinegar, cleaning solutions, warm water (do not
exceed 120°F/49°C) or nontoxic household cleaning chemicals for carpets, floors, walls, glass,
counter tops and ceilings. DO NOT use sprayer that has been used with herbicides, pesticides or
other toxic chemicals for household applications.
General Outdoor Use: Use the sprayer for cleaning windows or with a detergent for general
purpose cleaning. Other applications include wood preservatives, waxes, water proofing, and
diluted household bleach (max. 1 part household bleach to 9 parts water solution).
SPRAYER COMPONENTS & USE INFORMATION
NOZZLE ASSEMBLY
Figure 1-2
Unscrew the nozzle cap (1) from the nozzle body (3) with retaining nut (2) fastened tightly to
the elbow (5). Unscrew the retaining nut (2). Push the nozzle body (3) with the nozzle gasket
(4) out of the retaining nut (2). To reinstall the nozzle, reverse the above instructions.
Figure 3
Unscrew the retaining nut from the elbow and push the fan nozzle tip and gasket out of the retaining
nut. To reinstall the nozzle, reverse the above instructions.
1. Poly
Nozzle Cap
e
WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand.
Insert the wand into shut-off valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
.
All manuals and user guides at all-guides.com
1. Brass
Nozzle Cap
2. Retaining
Nut
3. Nozzle
Body
4. Nozzle
Gasket
5. Elbow
Figure 1
Retaining Nut
Wand
O-ring
2. Retaining
Nut
3. Nozzle
Body
4. Nozzle
Gasket
5. Elbow
Figure 2
Shut-off
Valve
2E
Retaining Nut
Fan Nozzle Tip
Nozzle
Gasket
Elbow
Figure 3
Publicité
