NEC MultiSync IntelliBase Audio Mode D'emploi page 10

NEC-ADA201 Eng/Fr. manual
Step 6 Locate the two
screws that
are supplied
with the
IntelliBase
and attach
the IntelliBase
to the adapter
plate and
monitor as
shown in
Figure 3E.
Proceed to Page 10 to connect your MultiSync monitor with IntelliBase
Audio to your system.
MultiSync Monitor Model Names
MultiSync XE21, XP21, E1100, E1100+, P1150 and P1250+
Step 1 With the monitor
unplugged from your
system and the wall
outlet, carefully turn
the monitor upside
down on a firm
table so that the
base is facing
up as shown
in Figure 1.
All manuals and user guides at all-guides.com
9/8/98 12:26 PM Page 10
ROTATE ADAPTER
PLATE UNTIL IT
ALIGNS WITH
THROUGH HOLES
ON THE BASE
MONITOR IN POSITION TO
REMOVE THE BASE AND ATTACH
INTELLIBASE AUDIO
Figure 1
7
Figure 3E
INTELLIBASE
(BOTTOM VIEW)
BASE