Télécharger Imprimer la page

JVC KENWOOD KDC-BT720HD Mode D'emploi page 15

Ampli-tuner lecteur de cd

Publicité

Les langues disponibles

Les langues disponibles

BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
– aptX Codec (aptX)
Connect the microphone
MIC (Microphone input terminal)
Rear panel
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
Pair a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the
unit and the device.
1
Press
2
Search and select this unit model name (KDC-BT7
"PAIRING"  "PASS XXXXXX"  Device name  "PRESS"  "VOLUME KNOB" scrolls on the
display.
• For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching.
• Refer also to the manual supplied with your Bluetooth device.
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed and " " will light up when the Bluetooth
connection is established.
• Up to five devices can be registered (paired) in total.
• Only one Bluetooth device can be connected at any time.
• This unit supports Secure Simple Pairing (SSP).
Microphone
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the
(supplied)
device to the unit manually. Refer to the instruction manual of the Bluetooth device for more
information.
• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if
you reset the unit. To delete the paired device,
• When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing
request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is turned on.
– [AUTO PAIRING] is set to [ON]. ( 17)
– KENWOOD MUSIC PLAY application is installed on the Android device.
to turn on the unit.
HD) on the Bluetooth device.
**
17, [DEVICE DELETE].
ENGLISH
13

Publicité

loading