Kenwood DPX793BH Mode D'emploi page 31

BLUETOOTH®
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the iPhone/iPod (via Bluetooth or via USB input
terminal) or Android smartphone (via Bluetooth).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
REMOTE APP
SELECT Select the device (IOS or ANDROID) to use the application.
IOS YES: Selects iPhone/iPod to use the application via Bluetooth or connected via
USB input terminal. ; NO: Cancels.
If IOS is selected, select iPod BT source (or iPod FRONT/iPod REAR/iPod USB if your
iPhone/iPod is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod FRONT/iPod REAR/iPod USB source to iPod BT source.
ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ;
NO: Cancels.
ANDROID LIST* Selects the Android smartphone to use from the list.
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
.
Default: XX
STATUS Shows the status of the selected device.
IOS CONNECTED: You are able to use the application using the
iPhone/iPod connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED: No IOS device is connected to use the
application.
ANDROID CONNECTED: You are able to use the application using
the Android smartphone connected via Bluetooth.
ANDROID NOT CONNECTED: No Android device is connected to use
the application.
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth on this
unit.
Press repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone
via USB input terminal. ( 10)
• If you plug in an iPhone/iPod to the USB input terminal while
listening to iPod BT source, the source automatically change to
iPod FRONT/iPod REAR/iPod USB. Press
the device is still connected via Bluetooth.
to select iPod BT if
27
ENGLISH