Publicité
Les langues disponibles
Les langues disponibles
EN
20
Cleaning
WARNING
Danger of electric shock
Always remove the plug from the socket-outlet and allow the
fan blower to stop acting before cleaning it.
Do not immerse the unit in water.
•
Always remove the plug from the socket-outlet and allow the fan blower
to stop acting before clean it.
•
Clean the external surfaces of the unit with a soft damp (not dripping wet)
cloth.
•
Do not use any cleaning chemicals such as detergents and abrasives.
•
Do not allow the interior (special for the PCB) to get wet as this could
create a hazard.
•
After extended periods of use, be sure to replace the water in the tank
with fresh clean water at least weekly. Also remember to clean the fi lter by
unscrewing the fi lter and removing the fi lter cradle. It should be cleaned in
a mild soapy solution and then left to dry before replacing the fi lter.
•
When the unit is not in use, make sure that it is unplugged from the wall
socket, water is drained thoroughly and it is placed back into its original
box for storage until later use.
•
In case of malfunction or doubt, do not try to repair the fan yourself, it may
result in a fi re hazard or electric shock.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the
product or on the packaging indicates that this product must
not be disposed of with household waste. Instead, it must be
taken to a collection point for the recycling of electrical and
electronic equipment. By disposing of it in accordance with
the rules, you are protecting the environment and the health
of your fellow human beings from negative consequences.
For information about the recycling and disposal of this
product, please contact your local authority or your
household waste disposal service.
Publicité
