Beko HCF61620X Mode D'emploi page 12

Setting up the device
5
A
WARNING: Before starting the ins-
tallation, read the safety information
on User Manual.
WARNING: Failure to install with
B
screws and stabilizers in accordance
with these instructions may result in
electric shock.
C
Please refer to page 148 for the ins-
tallation guide.
For the installation of the hood, please contact the
nearest Authorized Service.
It is the customer's responsibility to prepare the
location and electrical installation of the hood.
5.1 Position of the appliance
• Distance between the cooker and the cooker
hood must be considered prior to assembly. This
distance should be 65 cm.
• Distance must be measured from the surface of
grate for gas cookers, From surface of glass for
electric cookers.
12 / EN
5.2 Installation accessories
1
2
3
4
Ø 5 x 45 mm
1. Installation template
2. Chimney clamp
3. Chimney connection plate
4. Ø5x45 screw
5. Ø8x40 dowel
6. M5x16 screw
7. Ø2,9x6,5 screw
8. Ø3,9x9 screw
9. Washer
10. Power supply cord
5.3 Storage
• If you do not intend to use the appliance for a
long time, please store it carefully.
• Please make sure that the appliance is unplug-
ged, cooled down and totally dry.
• Store the appliance in a cool and dry place.
• Keep the appliance out of the reach of children
5.4 Handling and transportation
• During handling and transportation, carry the
appliance in its original packaging. The packa-
Cooker Hood / User Manual
5
Ø 8x40 mm
6
Ø M5x16 mm
7
Ø 2,9 x 6,5 mm
8
Ø 3 x 9 mm
9
10