Nussbaum ATT TC 110 Manuel D'instructions page 30

disposing properly used batteries (if contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce electrical and electronic equipments, to minimize the use of
landfills for the disposal of the products and to improve the quality of life by preventing that potentially hazardous substances are released in the
environment.
The manufacturer's Serial plate is fixed on the back of the machine.
If gives the following information:
1- Manufacturer information
2- Model
3- Serial number
4-
Phases
5-
Voltage requirements
6-
Frequency
7-
Rated draw
8-
Power absorbed
9-
Working pressure
10-
Weight
11-
Year
17. TROUBLE SHOOTING
PROBLEM
When the pedal (1, Fig. H) is pressed the table top does not turn.
CAUSES
1) The power plug is not inserted.
2) No power from the mains electric supply.
REMEDIES
1) Insert the plug correctly in its socket.
2) Reset the mains electric supply.
PROBLEM
When the table top (5, Fig. H) or the bead breaker (3, Fig. H) pedal is
pressed, nothing happens.
CAUSES
1) No compressed air supply to the system.
2) Compressed air hose is crimped or crushed.
REMEDIES
1) Check and correct the compressed air supply source.
2) Check and correct any hose defects. Replace hose if damaged.
WARNING:
If, inspite of the above mentioned indications the tyre
changer doesn't work properly, do not use it and call
for technical assistance.
TC 110 - Liga C 200 TC 110 - Liga C 200
All manuals and user guides at all-guides.com
16. DATA ON SERIAL PLATE
30
ENGLISH • Instructions manual
2
5
7
8
6
4
9
10
7
9
8
13
6
2
1
5
3
1
11
3
15
10
12
11
14
H
4