Publicité
Les langues disponibles
Les langues disponibles
CReader Series
2. Register & Update (Cont'd)
Select Language
Product Serial Number
6. Select the updates you would like to perform or click "Select All",
and then click [Download] to start downloading. (Note: For CR910,
only one piece of diagnostic software can be selected and downloaded.)
7. Once all steps are complete, restart your tool. It will prompt you to
upgrade, click [OK] to start updating. It may take
several minutes to finish the update.
8. The update process is complete, your tool is now ready for use.
3. Main Menu Screen
Once the tool is powered, it will enters the main menu screen, it
mainly includes the following functions:
Diagnose: It mainly consists of OBD/EOBD diagnosing and
Ÿ
Reset/System Scanning(varies with product models).
Review: To review the recorded DTC, datastream etc.
Ÿ
Settings: To configure the system language, measurement
Ÿ
units, turn on/off beeper and recording mode.
Help: Includes DLC location, DTC lookup and tool information
Ÿ
etc.
4. Change Language
The tool supports multiple languages. To change the language,
select "Settings" -> "Language", choose the desired one from the list
and press [OK].
All manuals and user guides at all-guides.com
Quick Start Guide
9
English
Device Upgrade
5. Start Diagnostics
Diagnosis Flowchart of Vehicle System
This flowchart only applies to CR611/CR6011/CR801/CR8001/CR811
/CR821/CR8021/CR910/CR9010/CR920/CR9020, which support diagnosis
of electronic control systems of single vehicle make.
Note*1: For CR801/CR8001/CR811/CR821
Select "Diagnose"
/CR8021/CR920/CR9020, it also features all
kinds of resetting functions. In this case, the reset
menu is located under the vehicle model.
Select "Scan"
(See Note*1)
Select Vehicle
Select test function
Manufacturer
Select Vehicle Model
Select test system
Automatic
(Note: This mode allows your
tool to scan the vehicle test
system automatically)
Resetting Flowchart
Note: This flowchart only applies to CR701/CR7001/CR981/CR9081 which
only supports the OBD/EOBD diagnosis and resetting function.
Follow the instructions
Select "Diagnose"
on the screen to operate
Select the desired reset
Select "Reset"
item (e.g. oil lamp reset)
LAUNCH
Read fault code
Clear fault code
Read data stream
(See Note*2)
Note*2: This function
does not apply to
CR611/CR6011.
Manual Select
(Note: In this case, you need to
choose the desired system
manually. Just follow the on-
screen instructions to proceed.)
Select the service mode
(The available mode varies
from vehicle to vehicle)
Select the car brand
Publicité
