Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROL
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two "AAA" batteries (not supplied).
3. Replace the battery compartment cover.
HOW TO USE THE REMOTE CONTROL
You can use the remote control to operate your VCR and
Cable/Satellite box besides the TV after the batteries are
installed and you have registered the codes that operate
your products.
Some buttons are used exclusively for each product and
some buttons are used in common with each product.
To operate your products correctly using this universal remote
control follow each step below.
A, B, C, D
A
6
3N11301A-E
B
B, C, D
C
D
B, D
6
Use two "AAA" size batteries. The batteries may last
approximately one year depending on how much the remote
control is used. For best performance, it is recommended
that batteries should be replaced on a yearly basis, or when
the remote operation becomes erratic. Do not mix old and
new batteries or different types.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries
in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries not intended to be re-
charged; they can overheat and rupture. (Follow battery
manufacturer's directions.)
A. For TV
1
Press the TV button first.
2
Aim remote at TV.
3
Press the POWER button.
4
Press other buttons to operate the features of your TV.
You can use the CH L and M button, the 0-9 buttons.
B. For VCR
1
Press the VCR button first.
2
Aim remote at VCR.
3
Press the POWER button to turn on VCR.
4
Press other buttons to operate the features of your
VCR. You can use the VCR CH L and M button, the 0-
9 buttons, the CH ENTER button.
C. For CABLE/SATELLITE box
1
Press the CABLE button first.
2
Aim remote at CABLE/SATELLITE box.
3
Press the POWER button to turn on your CABLE/SATELLITE box.
4
Press other buttons to operate the features of your
CABLE/SATELLITE box. You can use the CH L and M
button, the 0-9 buttons, the CH ENTER button.
D. For DVD
1
Press the DVD button first.
2
Aim remote at DVD.
3
Press the POWER button to turn on DVD.
4
Press other buttons to operate the features of your DVD.
You can use the VCR CH L and M button (DVD SKIP),
the TOP MENU button, the DVD CLEAR button, the DVD
MENU button the 0-9 buttons, the CH ENTER button.
NOTES:
• While operating the TV, if the CH L and M buttons do not
respond, press the "TV" button to reactivate TV mode.
• Some buttons that have same functions are called different
names according to the brand and model of the product. For
example, RESET may be called "CANCEL".
• The buttons A, B, C and D are used exclusively for each prod-
uct. You can use these buttons whenever you want.
10/9/03, 5:17 PM
(CONTINUED)
Publicité
