Citizen JCTV2700 Manuel D'instructions page 13

ADJUSTING PICTURE
You can adjust the settings for colour, sharpness, contrast,
brightness and tint.
1
Press the MENU button.
2 Press the CH (CHANNEL) L or M button repeatedly
until the indicator next to "PICTURE" begins to flash,
then press the ENTER button.
Press the CH (CHANNEL) L or M button repeatedly to
3
select the option you want to adjust.
BRIGHTNESS CONTRAST
COMPONENT
SOUND ADJUSTMENTS
You can adjust the setting for bass, treble, balance,
simulated surround sound and audio stabilizer.
1
Press the MENU button.
Press the CH (CHANNEL) L or M
2
button until the indicator next to
"AUDIO" begins to flash, then
press the ENTER button.
3
Press the CH (CHANNEL) L or M button repeatedly to
select the item you want to adjust.
BASS TREBLE
SURROUND
4
Press the VOL (VOLUME)
setting.
BASS stronger
TREBLE
stronger
BALANCE right speaker stronger
STABLE SOUND
ON
SURROUND
ON
3N11301A-E
COLOR TINT SHARPNESS
MENU
CH SETUP
PICTURE
AUDIO
LANGUAGE/IDIOMA/LANGUE
L / M / ENTER / MENU / EXIT
BALANCE
STABLE SOUND
or button to adjust the
weaker
weaker
left speaker stronger
OFF
OFF
13
4
Use the VOL (VOLUME)
setting.
increase brightness
BRIGHTNESS
increase contrast
CONTRAST
COLOR
enhances color definition
add greenish tint
TINT
makes picture clearer
SHARPNESS
DVD
COMPONENT
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting menu
appears on-screen.
SIMULATED SURROUND SOUND FEATURE
The SIMULATED SURROUND SOUND feature expands
the audio listening field wider and deeper to create a 5.1
listening effect from the TV's speakers.
AUDIO STABILIZER FEATURE
The Audio Stabilizer feature decreases the volume
difference of very loud and very soft sounds. This feature is
best used in a night-time environment where it may be
difficult to hear a whisper but an explosion may wake up
someone sleeping. The Audio Stabilizer keeps the audio at
a more stable output level.
TO RETURN TO INITIAL SETTING
Press the RESET button while the sound adjusting mode
appears on the screen.
NOTE:
The on-screen display will disappear 6 seconds after finishing
an adjustment. The settings can only be adjusted when they
are displayed on the TV screen.
10/9/03, 5:17 PM
or button to adjust the
decrease brightness
decrease contrast
decreases color definition
add reddish tint
makes picture softer
OTHER
13