Beko HNU51311SH Mode D'emploi page 12

3 Installation and Use of the Appliance
Pic. 8
1. 3.5 x 9.5 Screw
2. Ø 120 mm Plastic Flue
3. BodyValve Pin Socket
• Attach the plastic flue contained in the package
to the body of the appliance using 2 screws 3.5
x 9.5. (Pic. 8) Do not rub it against the surface.
Pic. 8
Pic. 9
1. Air discharge pipe
2. Air exhaust flue of the hood
• Attach the air discharge pipe to the air exhaust
flue and fasten via clamp (Pic. 9).
12 / EN
All manuals and user guides at all-guides.com
1
2
3
CAUTION
As the bends and elbows in the
A
aluminum pipe will cause decrea-
se in the air suction power, using
these must be avoided as much as
possible.
1
2
Pic. 10
1. Kitchen cabinet bottom view
2. 4 X 3,9 X 32 hood installation screw
• Place the hood into the kitchen cabinet and
attach the hood to 4 installation holes drilled
before (Pic. 10).
3.4 Use of the Appliance
3.4.1 Use of the Rocker Switch
1 2 3
• Bring the lamp switch to position '0' to turn off
the lamp.
• Bring the lamp switch to position '1' to turn on
the lamp.
• Bring the motor switch to position '0' to turn off
the motor.
• You can operate the motor in the 1st speed level
minimum and in the 3rd speed level maximum
according to the density of cooking steam.
Hood / User Manual