Publicité
TROUBLE SHOOTING
General Information:
Environmental Factors - There are a number of factors that will affect your desired comfort level. These factors can
include insulation, open or drafty doors and windows, and outside temperature. Please check and take action if any of
these potential problems are affecting your heaters ability to adequately warm your room.
Supplemental Heat - Portable electric heaters are intended for supplemental heating of rooms to heat the room you
are in and turn down the central heat thermostat. They are not intended to replace central heating systems.
Do NOT attempt to repair or adjust any electrical or mechanical functions on this heater. Doing so
will void warranty. The inside of the heater contains no user serviceable parts. All servicing should
be performed by qualified personnel only.
Trouble
• Heater Does
☛ Timer Activated.
Not Turn On.
☛ Manual user reset is activated.
☛ Not plugged in properly.
☛ Electrical outlet does not hold plug
in securely.
☛ Thermostat set too low.
☛ Obstruction causing the heater not
to operate.
☛ Circuit breaker trips.
• Not Enough
☛ Heater is in Low or Fan Only setting.
Heat.
☛ Thermostat set too low.
• Heater cycles
☛ The thermostat automatically turns
ON and OFF
the heater on and off to maintain
frequently.
selected comfort level.
© 2014 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Imported and
distributed by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, 20 B Hereford
Street, Brampton, Ontario L6Y 0M1.
All manuals and user guides at all-guides.com
T R O U B L E S H O O T I N G
Troubleshooting for your Heater
Probable Cause
MODE
MODE
MODE
Solution
✔ Press the Power Button to turn on the heater.
✔ Follow reset instructions listed in this manual.
✔ Ensure plug is properly inserted. Make sure
electrical outlet and circuit breaker are working.
✔ Have outlet replaced by a licensed electrician.
✔ Press the Up (
) Button to the highest
temperature setting.
✔ Unplug the heater and remove all obstructions.
Position your heater 36 inches (91 cm) away
from all objects.
✔ Make sure no other high wattage appliances are
operating on the same circuit and reset breaker if
needed.
✔ Change setting to High Heat.
✔ Press the Up (
) Button to the highest
temperature setting.
✔ To make this occur less frequently press the Up
(
) Button to the highest setting.
Printed In China
Publicité
