Publicité
F E AT U R E S - O P E R AT I O N S
C L E A N I N G / M A I N T E N A N C E
Figure 1
A
B
C
A. Front Grill
B. Remote
Control IR
Lens
E
MODE
C. Control Panel
Thermostat Control
Press the Thermostat Button (
thermostat setting, and the LCD will display " 29 °" as the
default temperature setting. Your heater is equipped with
a digital thermostat that allows you to set your heater to
a precise comfort level (10°C-29°C) by pressing the Up
(
) and Down (
) buttons on the control panel or
remote control. The LCD Display will show the selected
temperature reading. When the preset temperature is
reached, the heater will cool down by blowing cool air for
60 seconds, the power light will flash during the cool
down period, and then the heater will shut off. When the
room temperature drops below the preset temperature,
the heater will automatically turn on again to maintain
the preset temperature level.
NOTE: If the control panel/remote control is inactive for
5 seconds, the LCD display will show the setting
temperature.
NOTE: It is normal for the heater to cycle ON and OFF as
it maintains the preset temperature. To prevent the unit
from cycling, you need to change the thermostat setting.
The digital thermostat has memory; it will remember the
All manuals and user guides at all-guides.com
MODE
D
D. Casters (4)
E. Remote
MODE
Control
MODE
MODE
) will activate the
MODE
last temperature setting before the heater is turned off.
However, if the heater is unplugged, the digital
thermostat will no longer remember the previous
temperature setting. You will need to reset the digital
thermostat if the heater is unplugged.
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN
OPERATION.
Set Timer
This heater is equipped with 24-Hour Auto Shut-off Timer
feature. This allows you to program your heater to shut
off automatically after running a defined time interval
(from 0 to 24 hours).
1. Press the Timer Button (
MODE
remote control to activate the Timer, the Timer icon
(
) will illuminate on LCD Display.
2. Press the Up (
) and Down (
MODE
from 0 to 24 to select your desired time interval for
the heater to shut-off automatically. The selected
hour and the "Hr" icon will appear on the LCD
Display to indicate that the selected timer is activated.
3. To cancel the Timer feature, press and hold the Timer
Button (
) for 3 seconds.
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap solution.
2. NEVER use abrasive or flammable solvents to clean
the unit.
3. After cleaning, be sure to completely dry the unit
with a cloth or towel.
TIP: Over time, dust may accumulate on the front
grills. This can be removed by wiping the unit with a
damp cloth.
) on the control panel or
) button to adjust
Publicité
