Basic Playback - Pioneer ELITE VSX-45 Guide Rapide

Basic playback

Multichannel playback
2
10
1
Switch on the playback component.
E.g.) Turn the Blu-ray Disc player connected to the HDMI
BD IN terminal on.
2
Switch the input of the receiver.
E.g.) Press BD to select the BD input.
3
Press AUTO to select 'AUTO SURROUND'.
Also press SURR or ADV for multichannel playback. Select
your preferred listening mode.
4
Start the playback component's playback.
E.g.) Start playback of the Blu-ray Disc player.
5
Use VOLUME +/– to adjust the volume level.
• When no sound is emitted, increase the volume to
approximately –30 dB.
Notes
• When the sound is not produced from the center speaker,
rear speaker and subwoofer, refer to "Frequently asked
5
questions" in the booklet.
• When the remote control does not work, refer to the
"Frequently asked questions" in the booklet.
3
To enjoy the many functions of the
unit to the fullest extent
Load the CD-ROM into your computer and see
the "Operating Instructions" (PDF) from the
menu screen to read.
Notes
• This unit supports AirPlay. For details, see "Using AirPlay
on iPod touch, iPhone, iPad, and iTunes" of the operating
instructions and the Apple website (http://www.apple.
com).
• This unit's software can be updated ("Software Update"
of the operating instructions). With Mac OS, it can
be updated using Safari ("Using Safari to update the
firmware" of the operating instructions).